Spring Strut and Spring Strut Mounting Rear for 2012 Mercedes-Benz CL600
No.
Part # / Description / Price
Price
5
Exchange Air Suspension Strut 1 
Mercedes-Benz
Mercedes-Benz Notes: PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
Description: Rear right.
MSRP $2,020.00
$1,452.00
MSRP $2,020.00
$1,452.00
5
Air Suspension Strut 1 Mercedes-Benz
Mercedes-Benz Notes: PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
Description: Rear left.
MSRP $1,400.00
$1,002.00
MSRP $1,400.00
$1,002.00
10
Wiring Harness Mercedes-Benz
Mercedes-Benz Description: Left and right suspension strut. Air spring.
MSRP $28.50
$22.10
MSRP $28.50
$22.10
20
Nut-And-Washer Assembly Mercedes-Benz
Mercedes-Benz Description: Suspension strut at body, left. Suspension strut to body M8.
MSRP $6.50
$4.94
MSRP $6.50
$4.94
25
Hexagon Head Bolt Mercedes-Benz
Mercedes-Benz Description: Hydropneumatic spring leg to spring control arm. M14X1.5X80
Diameter: 14mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1,5mm. Suspension strut at spring link lh and rh. Spring link to wheel carrier. Suspension strut to spring link. Rear axle differential to cross bridge at front left and right. Trailing arm to rear axle, upper left and right. Trailing arm to frame, lower left and right.
Diameter: 14mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1,5mm. Suspension strut at spring link lh and rh. Spring link to wheel carrier. Suspension strut to spring link. Rear axle differential to cross bridge at front left and right. Trailing arm to rear axle, upper left and right. Trailing arm to frame, lower left and right.
MSRP $18.50
$14.30
MSRP $18.50
$14.30
30
Hex Nut W Flange + Piece Mercedes-Benz
Mercedes-Benz Description: Hydropneumatic spring leg to spring control arm. Suspension strut to spring link M14X1.5. Torsion bar linkage to suspension strut.
MSRP $5.50
$4.29
MSRP $5.50
$4.29
50
Hydropneumatic Spring Leg Mercedes-Benz
Mercedes-Benz Notes: PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
Description: Left rear axle.
MSRP $1,000.00
$720.00
MSRP $1,000.00
$720.00
50
MSRP $2,270.00
$1,632.00
60
Hexalobular Screw Mercedes-Benz
Mercedes-Benz Description: To rear left and right susp. M8X20
Diameter: 8mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1mm. To suspension strut left front. Connector hose. Propeller shaft to front axle differential. Propeller shaft to transmission. Propeller shaft to transfer case and front axle gear.
Diameter: 8mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1mm. To suspension strut left front. Connector hose. Propeller shaft to front axle differential. Propeller shaft to transmission. Propeller shaft to transfer case and front axle gear.
MSRP $3.00
$2.34
MSRP $3.00
$2.34
70
MSRP $218.00
$161.20
70
MSRP $184.00
$136.40
75
O-Ring Mercedes-Benz
Mercedes-Benz Description: At pressure line. 8x2mm. High pressure hose. 8x2mm. Connector hose. 8X2MM. Left. 8x2mm. To low-pressure line. 8x2mm.
MSRP $2.90
$2.21
MSRP $2.90
$2.21
80
MSRP $48.50
$37.70
110
MSRP $132.00
$100.33
200
Plug Mercedes-Benz
Mercedes-Benz Description: Front valve unit Y36/1. 4-PIN MLK. Valve unit y36/1,y36/2. 4-pin mlk. Rear valve unit Y36/2. 4-PIN MLK.
200
Clutch Housing Mercedes-Benz
Mercedes-Benz Description: Front valve unit y36/1. 4-pin mlk1.2
model 1: mlk
model 2: 1.2
slots: 4. X86/1. Nox sensor control unit separating point. Connector: 1. 4-pin mlk1.2
model 1: mlk
model 2: 1.2
slots: 4.
model 1: mlk
model 2: 1.2
slots: 4. X86/1. Nox sensor control unit separating point. Connector: 1. 4-pin mlk1.2
model 1: mlk
model 2: 1.2
slots: 4.
MSRP $11.00
$8.32
MSRP $11.00
$8.32
210
Single-Wire Seal Mercedes-Benz
Mercedes-Benz Description: Fuel pump M3/3. 0.22-1.0 MM2 MLK1.2Leitungsquerschnitt Min/Max: 0,22mm2-1,0mm2ELA: +Model 1: MLKModel 2: 1.2Release tool: W220 589 01 99 25Crimp tool: W220 589 01 99 84. FOGLAMPS E5/1,E5/2. 0.22-1.0 MM2 MLK1.2Leitungsquerschnitt Min/Max: 0,22mm2-1,0mm2ELA: ...
MSRP $11.00
$8.45
MSRP $11.00
$8.45
210
Crimp Tml Socket Contact Mercedes-Benz
Mercedes-Benz Description: RECIRCULATING PUMP PLUG CONNECTION X73/2. 0.75-1.0 MM2 MLK1.2SLeitungsquerschnitt Min/Max: 0,75-1,0mm2Oberflächenschutz PINs: AgELA: +Model 1: MLKModel 2: 1.2SRelease tool: W220 589 01 99 25Crimp tool: W220 589 04 99 13. VALVE UNIT Y36/1,Y36/2. 0.75-1.0 M ...
MSRP $3.00
$2.30
MSRP $3.00
$2.30
1 This price excludes a refundable manufacturer's core charge. Add the part to your cart to see the core charge.